7. Remove the under-carriage protector assembly from the carriage assembly. You are recommended to
wear protective gloves.
Front tube shelf
Removal
WARNING! Turn off the printer and disconnect both power cords.
1. Remove the Left cover on page 249.
2. Remove the
Right cover on page 246.
3. Remove the
Top cover on page 254.
4. Remove the inner light PCAs (see
Inner light PCA on page 439).
5. Remove the T-15 screw that connects a grounding cable to the front tube shelf.
6. Remove the T-15 screw that holds the front tube shelf to the left arch.
ENWW Front tube shelf 331
To Next Page
Loading...
