▲
Go to Service Menu > 2. Image Quality Prints > 2.1 Print ALL Plots.
2.2 Printhead Alignment Menu
2.2.1 Test Plot
Description
The Printhead Alignment Test Plot allows you to check the accuracy of the current printhead alignment.
Refer to the
Printhead alignment status plot on page 190.
for more details.
▲
Go to Service Menu > 2. Image Quality Prints > 2.2 Printhead Alignment > 2.2.1 Test Plot.
2.2.2 Advanced Test Plot
Description
The purpose of the Advanced Test Plot is to help you to visually check for any alignment problem in the
printer. Refer to the
Advanced alignment diagnostic print on page 194 for more details.
Procedure
▲
Go to Service Menu > 2. Image Quality Prints > 2.2 Printhead Alignment > 2.2.2 Advanced Test Plot.
2.2.3 Automatic Printhead Alignment
Description
This Service Utility triggers an Automatic Printhead Alignment.
Procedure
▲
Go to Service Menu > 2. Image Quality Prints > 2.2 Printhead Alignment > 2.2.3 Auto Printhead
Alignment.
2.2.4 Manual Printhead Alignment Menu
Description
Automatic printhead alignment may not produce optimal registration under certain conditions. Substrate
texturing, elasticity, and the behavior of the substrate under different temperatures may lead to some
imperfections with regard to printhead registration. In these circumstances, select the Manual Printhead
Alignment instead.
2.2.4.1 Print Alignment Pattern
Description
The printer prints 17 rows labelled from A to Q. Inspect the print and write down the number of the
straightest line in each row (for example, A:9).
Procedure
▲
Go to Service Menu > 2. Image Quality Prints > 2.2 Printhead Alignment > 2.2.4 Manual PH Alignment
Menu > 2.2.4.1 Print Alignment Pattern.
2.2.4.2 Manual Alignment Settings
Description
This is where the correction settings can be entered from the Manual Printhead Alignment.
174 Chapter 4 Service Tests, Utilities, and Calibrations ENWW
To Next Page
Loading...
