If any of the resistive values is out of range, check that the problem is not caused by the thermal switch, or
the “connections” to the thermal switch (in order to do so, you must disassemble the air curtain module).
How to interpret the service information pages
The service information pages contain the following information:
●
Current information
●
Usage information
●
Event logs
●
Calibration status
●
Connectivity configuration
●
All pages
It is possible to print the service information pages through the Embedded Web Server:
●
Support tab > Service Support > Printer Information.
Main characteristics
●
Available in English only (except the current information page).
●
Each page can be printed from the Web browser.
●
Each page can be sent by email from the Web browser.
Current information (1 of 2)
The first section is generic information and is available in every tab. It displays information such as the
current level of firmware installed, the serial number of the printer, and so on.
This page is in two parts: The first part displays information on the following:
ENWW How to interpret the service information pages 55
To Next Page
Loading...
