HP Latex 300 Series Service Manual

1. Remove/Replace Ink Cartridges.
2. Restart the printer.
Service engineer:
1. Reseat/Replace Printmech to ISS1 PCA cable.
2. Reseat/Replace Main PSU to Printmech cable.
3. Replace ISS PCA. See
Ink supply station PCAs on page 427.
4. Replace PrintMech PCA.. See
PrintMech PCA on page 433.
SE Code: 01.3:10 – IISS2 PCA problem
Problem description:
ISS1 to ISS2 Cable ISS PCA.
Corrective action:
Call agent:
1. Remove/Replace Ink Cartridges.
2. Restart the printer.
Service engineer:
1. Reseat/Replace ISS1 to ISS2 PCA cable.
2. Replace ISS PCA. See
Ink supply station PCAs on page 427
SE Code: 01.12:10 – Curing Control PCA failure
Problem description:
Curing Control to Printmech PCA Cable Curing Control PCA Printmech PCA .
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
1. Reseat/Replace Curing Control to Printmech PCA Cable.
2. Replace Curing Control PCA.
3. Replace Printmech PCA (very low probability). See
PrintMech PCA on page 433.
SE Code: 01.13:10 – Air Curtain and Printzone Heaters Control PCA failure
Problem description:
Printmech to Air Curtain and Printzone Heaters Control PCA Cable.
Corrective action:
Call agent:
▲
Restart the printer.
ENWW Continuable and non-continuable error codes 71

HP Latex 300 Series Specifications

General

Brand	HP
Model	Latex 300 Series
Category	Printer
Language	English