HP Latex 300 Series Service Manual

Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
1. Reseat/replace Air Curtain Box Fan.
2. Replace Air Curtain and Printzone Heaters Control PCA.
SE Code: 16.71:10 – Air Curtain system: Board box fan or cable damaged
Problem description:
Board box fan or cable damaged.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
1. Reseat/replace Air Curtain Box Fan.
2. Replace Air Curtain and Printzone Heaters Control PCA.
SE Code: 16.82:11 – Air Curtain steady resistor:Not connected
Problem description:
Air Curtain and Printzone Heaters Control to Curing Power Interconnect PCA Cables, Air Curtain Steady
Resistor.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
1. Reseat/Replace Air Curtain and Printzone Heaters Control to Curing Power Interconnect PCA cables.
2. Reseat/Replace Air Curtain Resistors.
SE Code: 16.83:11 – Vapor burst resistor: Not connected
Problem description:
Air Curtain and Printzone Heaters Control to Curing Power Interconnect PCA Cables, Air Curtain Burst Resistor.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
ENWW Continuable and non-continuable error codes 101

HP Latex 300 Series Specifications

General

Brand	HP
Model	Latex 300 Series
Category	Printer
Language	English