10. Place the maintenance cartridge into a plastic bag and seal with adhesive tape.
CAUTION:
●
Wear gloves.
●
Take the cartridge carefully and horizontally.
●
Handle, store, and transport it upright.
11. Clean any excess ink from the rear of the ink cartridge.
12. Place the ink cartridges, printheads, and maintenance cartridge into a box.
NOTE: It may be worth transporting the maintenance cartridge in a different container to avoid ink
spillage.
Reinstalling retention parts
Secure the parts inside the carriage path for transportation:
1. Add packing foam to the left side of the carriage, and secure with the red adhesive tape.
450 Chapter 10 Repackaging instructions ENWW
To Next Page
Loading...
