HP Latex 300 Series Service Manual

1. Check the Printmech to Printzone fans cable.
2. Check the Printzone fans.
3. Check the Printmech PCA.
SE Code: 12.14:10 – Printmech: 24V to Vacuum fans failure
Problem description:
The 24V cable from Printmech to Vacuum fans has a problem Printmech PCA is damaged.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
1. Check the Printmech to Vacuum fans cable.
2. Check the Vacuum fans.
3. Check the Printmech PCA.
SE Code: 12.15:10 – Printmech: 42V to Paper motor failure
Problem description:
The 42V cable from Printmech to Paper motor has a problem Printmech PCA is damaged.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
1. Check the Printmech to paper motor cable.
2. Check the paper motor.
3. Check the Printmech PCA.
SE Code: 12.16:10 – Printmech: 42V to Rewinder failure
Problem description:
The 42V cable from Printmech to Rewinder has a problem Printmech PCA is damaged.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
1. Check the Printmech to Rewinder cable.
2. Check the Rewinder.
3. Check the Printmech PCA.
80 Chapter 3 System error codes ENWW

HP Latex 300 Series Specifications

General

Brand	HP
Model	Latex 300 Series
Category	Printer
Language	English