HP Latex 300 Series

Service engineer:
1. Clean all the printheads and check their status.
2. Replace the printhead.
SE Code: 27.4:01 – Error due to a high number of nozzles out in printhead slot 4
Problem description:
High number of nozzles out in printhead slot 4.
Corrective action:
Service engineer:
1. Clean all the printheads and check their status.
2. Replace the printhead.
SE Code: 27.5:01 – Error due to a high number of nozzles out in printhead slot 5
Problem description:
High number of nozzles out in printhead slot 5.
Corrective action:
Service engineer:
1. Clean all the printheads and check their status.
2. Replace the printhead.
SE Code: 27.6:01 – Error due to a high number of nozzles out in printhead slot 6
Problem description:
High number of nozzles out in printhead slot 6.
Corrective action:
Service engineer:
1. Clean all the printheads and check their status.
2. Replace the printhead.
SE Code: 29:00 – Maintenance cartridge is almost full
Problem description:
Maintenance cartridge is almost full.
Corrective action:
Call agent:
▲
Replace the Maintenance Cartridge.
SE Code: 29:01 – Maintenance cartridge badly inserted
Problem description:
ENWW Continuable and non-continuable error codes 115