7. Unclip the ink supply tubes from the front tube shelf.
8. Remove the two T-15 screws that hold the front tube shelf to the right arch.
9. Unroute the trailing cable from the front tube shelf.
10. Slide out the front tube shelf on the right side (1), and unclip from the left (2).
11. Remove the front tube shelf from the printer.
Rear tube shelf
Removal
WARNING! Turn off the printer and disconnect both power cords.
1. Remove the Left cover on page 249.
2. Remove the
Right cover on page 246.
332 Chapter 8 Removal and installation ENWW
To Next Page
Loading...
Need help?
General
