HP Latex 300 Series

Curing fans cable.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
▲
Reseat/replace Curing fans cable.
SE Code: 16.41:10 – Curing system: module 1 failure
Problem description:
Curing resistor 1 disconnected or damaged.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
▲
Replace module 1.
SE Code: 16.42:10 – Curing system: module 2 failure
Problem description:
Curing resistor 2 disconnected or damaged.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
▲
Replace module 2.
SE Code: 16.43:10 – Curing system: module 3 failure
Problem description:
Curing resistor 3 disconnected or damaged.
Corrective action:
Service engineer:
▲
Replace module 3.
SE Code: 16.44:10 – Curing system: module 4 failure
Problem description:
Curing resistor 4 disconnected or damaged.
Corrective action:
ENWW Continuable and non-continuable error codes 99