HP Latex 300 Series Service Manual

SE Code: 12.34:10 – Printmech: 42V to Paper motor open circuit
Problem description:
The 42V cable from Printmech to Paper motor has a problem Printmech PCA is damaged.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
1. Check the Printmech to Paper motor cable.
2. Check the paper motor.
3. Check the Printmech PCA.
SE Code: 12.35:10 – Printmech: 42V to Rewinder open circuit
Problem description:
The 42V cable from Printmech to Rewinder has a problem Printmech PCA is damaged.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
1. Check the Printmech to Rewinder cable.
2. Check the Rewinder.
3. Check the Printmech PCA.
SE Code: 12.36:10 – Printmech: 42V to Scan motor open circuit
Problem description:
The 42V cable from Printmech to Scan motor has a problem Printmech PCA is damaged.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
1. Check the Printmech to Scan motor cable.
2. Check the Scan motor.
3. Check the Printmech PCA.
SE Code: 12.37:10 – Printmech: 42V to SOL slit solenoid open circuit
Problem description:
The 42V cable from Printmech to SOL slit solenoid has a problem Printmech PCA is damaged.
86 Chapter 3 System error codes ENWW

HP Latex 300 Series Specifications

General

Brand	HP
Model	Latex 300 Series
Category	Printer
Language	English