12. Disconnect the linkage from the pinchwheels cam arm.
13. Remove two T-20 screws (Type M) that secure the roller gear protector to the scan axis.
Print-zone lockers
Removal
WARNING! Turn off the printer and disconnect both power cords.
1. Remove the Right cover on page 246.
2. Remove the
Left cover on page 249.
3. Remove the removable print zone (see the ink collector section in the user’s guide).
4. Remove three T-8 screws (Type C) that secure the lock receptor assembly to the vacuum beam.
ENWW Print-zone lockers 397
To Next Page
Loading...
