7. Once the Left Scan-Axis Offset has been calculated the front panel prompts you to use the Up/ Down
keys to move the carriage until the right edge of the Left Alignment Mark on the Carriage Cover is
perfectly aligned with the Primer positioning indicator.
NOTE: To detect the exact position more easily while aligning the Carriage to the Primer it is a good
idea to press down lightly on the Primer while you are moving the Carriage.
While the Carriage is moving, the front panel shows the actual position and the direction of movement
and prompts you to press OK when done.
8. The front panel shows the actual Left Offset value and the system calculates the Right Scan-Axis Offset.
9. Once the Right Scan-Axis Offset has been calculated, the front panel prompts you to use the Up/ Down
keys to move the carriage until the left edge of the Right Alignment Mark is correctly aligned with the
Primer Positioning Indicator.
ENWW Service Menu 185
To Next Page
Loading...
