HP Latex 300 Series Service Manual

3. Disconnect all the cables connected to the right interconnect PCA and the PrintMech PCA.
4. Unroute all the disconnected cables so they are clear of the e-box.
5. Remove two T-20 screws (Type B) that secure the right-hand side of the e-box.
6. Remove two T-20 screws (Type A) that secure the left hand side of the e-box.
ENWW E-box 263

HP Latex 300 Series Specifications

General

Brand	HP
Model	Latex 300 Series
Category	Printer
Language	English