The following table explains the YZ part of the System Error Code or Warning:
Code Recovery action Response
00 Replace Possible for customer to perform action
01 Reseat/Reconnect/Clean/Adjust
(manually)
02 Calibrate/Adjust (using automatic process)
03 Power off and restart the printer
04 Upgrade system firmware
05 Upgrade driver or computer software
06 Add accessory
07 Escalate
08 Send plot again
09 Wrong part installed
10 Replace HP qualified personnel assistance required
11 Reseat/Reconnect/Clean/Adjust
(manually)
12 Calibrate/Adjust (using automatic process)
13 Power off
14 Upgrade system firmware
15 Upgrade driver or computer software
16 Add accessory
17 Escalate
18 Send plot again
19 Wrong part installed
ENWW System error codes and warnings—explanation 69
To Next Page
Loading...
