Lexmark C792 series - Page 103

Diagnostic information 2-63
5062
Go Back
Previous
Next
938.21
Electronics Hardware
Error
A staging motor failure occurred. • POR the printer.
• If the error message persists, go to “147.xx—
Staging motor error service check” on
page 2-87.
938.22
Electronics Hardware
Error
A printhead failure error occurred. • POR the printer.
• If the error message persists, go to “110.xx—
Printhead error service check” on page 2-67.
938.23
Electronics Hardware
Error
An autocomp motor error occurred. • POR the printer.
• If the error message persists, go to “146.xx—
Autocomp (tray 1) motor error service
check” on page 2-86.
938.24
Electronics Hardware
Error
A paper path redrive motor failure
error occurred.
• POR the printer.
• If the error message persists, go to “149.xx—
Paper path redrive motor error service
check” on page 2-88.
938.25–938.26
Electronics Hardware
Error
A printhead failure error occurred. • POR the printer.
• If the error message persists, go to “110.xx—
Printhead error service check” on page 2-67.
938.27
Electronics Hardware
Error
A weather station failure occurred. • POR the printer.
• If the error message persists, go to “938.27,
938.29, 938.30—Weather station error
service check” on page 2-138.
938.28
Electronics Hardware
Error
A remote weather station failure
occurred.
• POR the printer.
• If the error message persists, go to “938.28—
Remote weather station error service check”
on page 2-139.
938.29–938.30
Electronics Hardware
Error
A weather station failure occurred. • POR the printer.
• If the error message persists, go to “938.27,
938.29, 938.30—Weather station error
service check” on page 2-138.
938.31
Electronics Hardware
Error
A printhead failure error occurred. • POR the printer.
• If the error message persists, go to “110.xx—
Printhead error service check” on page 2-67.
950.00–950.29
NVRAM Failure
A mismatch occurred between the OP
panel NVRAM and the system board
NVRAM.
• POR the printer.
• If the error message persists, go to “950.00–
950.29—EPROM mismatch failure” on
page 2-140.
952.01–952.99
NVRAM Error
A recoverable CRC error has
occurred.
POR the printer to clear the error.
953.01–953.99
NVRAM Failure
An NVRAM failure occurred in the OP
panel.
• POR the printer.
• If the error persists, replace the OP panel UICC
card. See “OP panel UICC card removal” on
page 4-114.
954.01–954.99
NVRAM Failure
A system NVRAM failure has
occurred.
• POR the printer.
• If the error message persists, replace the
system board. See “System board removal”
on page 4-151.
955.00–955.99
Code Failure
A system board memory failure has
occurred.
• POR the printer.
• If the error message persists, replace the
system board. See “System board removal”
on page 4-151.
Error code Description Action