4-170 Service Manual
5062
Installation note:
Be sure that the tabs are inserted in their corresponding hole.
550-sheet tray drive assembly removal
1. Remove the media tray assembly. See “550-sheet media tray assembly removal” on page 4-166.
2. Remove the top metal cover. See “550-sheet tray top metal cover removal” on page 4-183.
3. Remove the deflector. See “550-sheet tray deflector removal” on page 4-169.
4. Remove the pick assembly. See “550-sheet tray pick assembly removal” on page 4-176.
To Next Page
Loading...
