EasyManuals Logo

Lexmark C792 series User Manual

Lexmark C792 series
705 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #228 background imageLoading...
Page #228 background image
3-16 Service Manual
5062
Go Back
Previous
Next
USB HS Test Mode
If the test fails, replace the failing USB cable.
1. From the Diagnostics menu, navigate to:
HARDWARE TESTS > USB HS Test Mode
2. Select the desired Port.
3. Select the desired Test.
To cancel the test, turn the printer off.
Beacons Test
Select On to turn on all printer beacons. The beacons remain on until you select Off.
DUPLEX TESTS
Duplex Quick Test
This test verifies if the Duplex Option Top Margin is set correctly. This test prints a duplexed version of the Quick
Test Page that can be used to adjust the Top Margin for the back of the duplexed page. You can run one
duplexed page (Single) or continue printing duplexed pages (Continuous) until Stop (
X) is pressed.
You must use either Letter or A4 paper.
1. From the Diagnostics menu, navigate to:
DUPLEX TESTS > Duplex Quick Test
2. Select Single or Continuous.
• The single test cannot be canceled.
• The printer attempts to print the Quick Test Page from the default paper source. If the default paper
source supports only envelopes, then the page is printed from Tray 1.
• Check the Quick Test Page for the correct offset between the placement of the first scan line on the
front and back side of a duplexed sheet.
• If adjustment is necessary, the Top Margin in the Registration menu must be adjusted first. The
Duplex Top Margin Offset may be adjusted next.
• A positive offset moves the text down the page and widens the top margin, while a negative offset
moves the text up the page and narrows the top margin.
3. Press Stop (X) to cancel the test.
Duplex Top Margin Offset
Modification of this setting controls the offset between the placement of the first scan line on the front and back
side of a duplex sheet.
Changing the value by 1 unit moves the margin by 1/100 inches. A positive value moves the text down the page
and widens the top margin. A negative value moves the text up the page and narrows the top margin.
Touch Back to return to the DUPLEX TESTS menu.
Ports Tests
Port 0
Port 1
Port 2
Port 3
Test J
Test K
Test SEO NAK
Test Packet
Test Force Enable

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark C792 series and is the answer not in the manual?

Lexmark C792 series Specifications

General IconGeneral
Print TechnologyColor Laser
Print Speed (Letter, Black)50 ppm
Print Speed (Letter, Color)50 ppm
Processor Speed1.2 GHz
Monthly Duty Cycle150, 000 pages
Maximum Paper Size8.5 x 14 inches (Legal)
Operating System CompatibilityWindows, Mac OS, Linux
Print Resolution1200 x 1200 dpi
Duplex PrintingStandard
ConnectivityUSB, Ethernet
Media Sizes SupportedA4, A5, Letter, Legal, Executive, Folio, JIS B5
Media Types SupportedCard Stock, Envelopes, Labels, Plain Paper, Transparencies
Input Capacity (Standard)650 sheets
Output Capacity (Standard)500 sheets

Related product manuals