2-40 Service Manual
5062
Print irregularities
Try one or more of the following:
• LOAD PAPER FROM A FRESH PACKAGE
The paper may have absorbed moisture due to high humidity. Store paper in its original wrapper until you
use it.
• CHECK THE PAPER TYPE AND WEIGHT SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray:
1. From the printer Paper menu, check the Paper Type and Paper Weight settings.
2. Before sending the job to print, specify the correct type settings from the computer:
• For Windows users, specify the setting from Print Properties.
• For Macintosh users, specify the setting from the Print dialog.
• LOAD STANDARD PAPER WITHOUT TEXTURED OR ROUGH FINISHES
• MAKE SURE THERE IS NO DEFECTIVE PRINT CARTRIDGE
Replace the worn or defective print cartridge.
• MAKE SURE THE TRANSFER BELT IS NOT DEFECTIVE
Replace the defective transfer belt. For more information, see the instruction sheet that came with the
replacement part.
• MAKE SURE THE FUSER IS NOT DEFECTIVE
Replace the defective fuser. For more information, see the instruction sheet that came with the
replacement part.
Leading edge
Trailing edge
To Next Page
Loading...
