Lexmark C792 series - 5-Bin Mailbox Output bin Paper Bail Removal

Repair information 4-247
5062
Go Back
Previous
Next
5-bin mailbox output bin paper bail removal
See“5-bin mailbox assembly (covers)” on page 7-35 for the part number.
Top bail:
1.
Remove the mailbox from the printer.
2. Remove the top cover. See “5-bin mailbox top cover removal” on page 4-253.
3. From the top cover, lift the bail to line up the bail arm with the slot (A), and squeeze the bail to release the
rear side.
4. Remove the bail.
Lower four bails:
1.
Squeeze both sides of the bail to release the arms from the slots.
2. Remove the bail.