3-6 Service Manual
5062
Accessing service menus
There are different test menus that can be accessed during POR to identify problems with the printer.
Diagnostics menu 1. Turn off the printer.
2. Press and hold 3 and 6.
3. Turn on the printer.
4. Release the buttons when the splash screen
appears.
The Diagnostics menu group
contains the settings and
operations used while
manufacturing and servicing the
printer.
For more information, see
“Diagnostics menu” on
page 3-7.
Configuration menu 1. Turn off the printer.
2. Press and hold 2 and 6.
3. Turn on the printer.
4. Release the buttons when the splash screen
appears.
The Configuration menu group
contains a set of menus, settings,
and operations which are
infrequently required by a user.
Generally, the options made
available in this menu group are
used to configure a printer for
operation.
See “Configuration Menu” on
page 3-26 for more information.
Network SE menu While in Network/Ports Menu, press and hold 9, 7,
and 6.
SE menu From a browser, add “/se” to the device IP address
(for example: http://158.183.3.2/se)
To Next Page
Loading...
