Lexmark C792 series - XX-5-Bin Mailbox Pass Thru Sensor Error Service Check

Diagnostic information 2-123
5062
Go Back
Previous
Next
432.xx—5-bin mailbox pass thru sensor error service check
Step Questions / actions Yes No
1 1. Bring the printer up in Diagnostics menu (turn off the
printer, press and hold 3 and 6, turn on the printer,
and hold the buttons until the splash screen appears).
2. Navigate to INPUT TRAY TESTS > Feed Test.
3. Select Tray 1.
4. Select Single.
Does the error reoccur?
Go to step 2. Problem solved.
2
1. Clear away anything in the paper path that might
cause the paper to jam .
2. Open the 5-bin mailbox access door.
3. Check the 5-bin mailbox pass thru sensor for damage.
Is the sensor damaged?
Replace the 5-
bin mailbox pass
thru sensor.
See“5-bin
mailbox sensor
(pass thru)
assembly
removal” on
page 4-252.
Go to step 3.