Lexmark C792 series User Manual

Diagnostic aids 3-25
5062
Go Back
Previous
Next
Print Log
The Print Log menu item prints a detailed report of each event in the log. The first page of the event log contains
a Printer Information section similar to what is printed on a Menu Setting Page. Printed at the top of each page is
the model name and serial number to assist in tracking each page of a report to a specific printer. The printout of
the log contains the following information for each error in the log:
• Page count when the error occurred (except for 900 service RIP software errors).
• Code versions of all packages when error occurred.
• Panel message when error occurred (except for 900 service RIP software errors).
• Debug information and secondary error codes, depending on the error.
The Clear Log operation clears out the errors that print in this report. The errors listed in the Display Log
operation do not necessarily match in number nor in order with the errors from the printer log.
Note: This log can be printed from the Configuration Menu, but the debug and secondary error codes are not
printed on this log.
Clear Log
This menu item deletes the event log. Once the event log is deleted, the only item remaining on the log is the
“Clear Log” event.
Touch Back to return to the EVENT LOG menu.
Exit Diags
Select Exit Diags to exit the Diagnostics menu and return to normal mode.

Lexmark C792 series Specifications

General

Print Technology	Color Laser
Print Speed (Letter, Black)	50 ppm
Print Speed (Letter, Color)	50 ppm
Processor Speed	1.2 GHz
Monthly Duty Cycle	150, 000 pages
Maximum Paper Size	8.5 x 14 inches (Legal)
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Connectivity	USB, Ethernet
Media Sizes Supported	A4, A5, Letter, Legal, Executive, Folio, JIS B5
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Input Capacity (Standard)	650 sheets
Output Capacity (Standard)	500 sheets