Lexmark C792 series - Staging Paper Path Reference Edge Assembly Removal

4-142 Service Manual
5062
Go Back
Previous
Next
Staging paper path reference edge assembly removal
See “Front” on page 7-7 for the part number.
1. Remove the rear cover. See “Rear cover removal” on page 4-20.
2. Remove the left cover. See “Left cover removal” on page 4-11.
3. Remove the fuser. See “Fuser assembly removal” on page 4-63.
4. Remove the ITU assembly. See “ITU assembly removal” on page 4-77.
5. Remove the standard media tray. See “Standard media tray removal” on page 4-150.
6. Lower the pick arm all the way.
7. Push the top of the deflector assembly down and rotate it back to release the upper hooks.
1
1
2