Lexmark C792 series User Manual

Diagnostic information 2-9
5062
Go Back
Previous
Next
202–203 paper jams
Paper jam in the standard exit bin:
1.
Firmly grasp the paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
2. From the operator panel, touch Continue, jam cleared.
Paper jam in the fuser:
1.
Open the left access door.
2. Open the fuser access door.
3. Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4. Close the door.
5. From the operator panel, touch Continue, jam cleared.
Paper jam under the fuser:
1.
Open the left access door.
2. If the paper is not visible, then remove the fuser unit.
3. Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4. Reinstall the fuser.
5. Close the door.
6. From the operator panel, touch Continue, jam cleared.
1
2

Lexmark C792 series Specifications

General

Print Technology	Color Laser
Print Speed (Letter, Black)	50 ppm
Print Speed (Letter, Color)	50 ppm
Processor Speed	1.2 GHz
Monthly Duty Cycle	150, 000 pages
Maximum Paper Size	8.5 x 14 inches (Legal)
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Connectivity	USB, Ethernet
Media Sizes Supported	A4, A5, Letter, Legal, Executive, Folio, JIS B5
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Input Capacity (Standard)	650 sheets
Output Capacity (Standard)	500 sheets