Lexmark C792 series - 2000-Sheet High-Capacity Feeder Left Anti-Tip Latch Assembly Removal

4-202 Service Manual
5062
Go Back
Previous
Next
5. Remove the two screws (A) securing the LED bracket to the drawer.
6. Detach the LED bracket.
Note: The LED bracket does not need to be completely removed from the machine. It may be allowed to
hang on the side.
2000-sheet high-capacity feeder left anti-tip latch assembly removal
See“Optional 2000-sheet high-capacity feeder” on page 7-23 for the part number.
1. Remove the jam clearance top cover. See “2000-sheet high-capacity feeder jam clearance top cover
removal” on page 4-198.
2. Remove the rear cover. See “2000-sheet high-capacity feeder rear cover removal” on page 4-228.
3. Remove the left side cover. See “2000-sheet high-capacity feeder left side cover removal” on
page 4-204.
A (88A0231)