General information 1-11
5062
• Preprinted papers that require a registration (the precise print location on the page) greater than ±0.09 in.,
such as optical character recognition (OCR) forms. In some cases, registration can be adjusted with the
software application to successfully print on these forms.
• Coated papers (erasable bond), synthetic papers, or thermal papers
• Rough-edged, rough or heavily textured surface papers or curled papers
• Recycled papers that fail EN12281:2002 (European)
• Paper having a weight less than 60 g/m
2
(16 lb)
• Multiple-part forms or documents
Selecting paper
Proper paper loading helps prevent jams and ensures trouble-free printing.
To help avoid jams or poor print quality:
• Always use new, undamaged paper.
• Before loading paper, know the recommended print side of the paper. This information is usually indicated
on the paper package.
• Do not use paper that has been cut or trimmed by hand.
• Do not mix media sizes, weights, or types in the same source; mixing results in jams.
• Do not use coated papers unless they are specifically designed for electrophotographic printing.
To Next Page
Loading...
