Lexmark C792 series - Printer Specifications

1-4 Service Manual
5062
Go Back
Previous
Next
• Firmware cards
– Bar Code
– PrintCryption
TM
• Printer hard disk
• Lexmark
TM
Internal Solutions Ports (ISP)
– RS-232-C Serial ISP
– Parallel 1284-B ISP
– MarkNet
TM
N8250 802.11 b/g/n Wireless ISP
– MarkNet N8130 10/100 Fiber ISP
– MarkNet N8120 10/100/1000 Ethernet ISP
Media handling options
•
550-sheet trays
• 2000-sheet high-capacity feeder
• Banner media tray
• High-capacity output stacker
• 5-bin mailbox
• StapleSmart
TM
finisher
Printer specifications
Power specifications
Average nominal power requirements for the base printer configuration. (Power levels are shown in watts.)
Maximum current shown in amp ergs.
Notes:
• Using a power converter or inverter is not recommended.
• The C792de, C792dte, and C792dhe are ENERGY STAR Qualified.
• All models ship with Sleep Mode set to On.
Electrical specifications
Low-voltage models
• 100 to 127 V ac at 50 to 60 hertz (Hz) nominal
• 90 to 137 V ac, extreme
High-voltage models
• 220 to 240 V ac at 50 to 60 hertz (Hz) nominal (not available in all countries and regions)
Printing states Power
Off 0W
Sleep Mode 10W
Hibernate Mode .75W
Standby Mode 50W
Simplex printing 850W
Duplex printing 760W