Lexmark C792 series - Staplesmart Finisher and High-Capacity Output Stacker; Finisher or Stacker Access Door Beacon LED and Beacon Housing Removal

Repair information 4-255
5062
Go Back
Previous
Next
StapleSmart finisher and High-capacity output stacker
Finisher or stacker access door beacon LED and beacon housing removal
See “Finisher/High-capacity output stacker assembly” on page 7-25 for the part number.
1. Remove the option from the printer.
2. Remove the left access door assembly. See “Finisher or stacker left access door assembly removal”
on page 4-262.
3. Remove the screw (A), and remove the beacon card.