Lexmark C792 series User Manual

2-48 Service Manual
5062
Go Back
Previous
Next
Toner rubs off
Try one or more of the following:
• CHECK THE PAPER TYPE AND WEIGHT SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray or feeder:
1. From the operator panel Paper menu, check the Paper Type and Paper Weight settings. Change the
Paper Weight setting from Normal to Heavy.
2. Before sending the print job, specify the correct paper type setting:
• For Windows users, specify the paper type from Print Properties.
• For Macintosh users, specify the paper type from the Print dialog.
• CHECK THE PAPER TEXTURE SETTING
From the operator panel Paper menu, make sure the Paper Texture setting matches the paper loaded in
the tray or feeder. If necessary, change the Paper Texture setting from Normal to Rough.
Additional checks—toner rubs off
Step Questions / actions Yes No
1 Is the fuser properly installed? Go to step 2. Install the fuser
properly.
2
Replace the fuser. See “Fuser assembly removal” on
page 4-63.
Does this fix the problem?
Problem solved. Replace the
LVPS. see
“Low-voltage
power supply
(LVPS)
removal” on
page 4-86.
Leading edge
Trailing edge

Lexmark C792 series Specifications

General

Print Technology	Color Laser
Print Speed (Letter, Black)	50 ppm
Print Speed (Letter, Color)	50 ppm
Processor Speed	1.2 GHz
Monthly Duty Cycle	150, 000 pages
Maximum Paper Size	8.5 x 14 inches (Legal)
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Connectivity	USB, Ethernet
Media Sizes Supported	A4, A5, Letter, Legal, Executive, Folio, JIS B5
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Input Capacity (Standard)	650 sheets
Output Capacity (Standard)	500 sheets