Lexmark C792 series User Manual

2-34 Service Manual
5062
Go Back
Previous
Next
Blurred or fuzzy print
Try one or more of the following:
• CHECK THE EP DRIVE ASSEMBLY AND TRANSFER MODULE
Blurred or fuzzy print is usually caused by a problem in the EP drive assembly or in the transfer module.
Check the EP drive assembly and transfer module for correct operation.
• CHECK PAPER FEEDING FROM EACH INPUT SOURCE
Blurred print can be caused by incorrect feeding from one of the input paper sources, paper trays, or
duplex paper path.
• CHECK THE HIGH-VOLTAGE CONTACTS
Check the high voltage spring contacts to ensure they are not bent, corroded, or damaged. Replace as
necessary.
Characters have jagged or uneven edges
If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the
software program.
Clipped images
Try one or more of the following:
• CHECK THE GUIDES
Move the width and length guides in the tray to the correct positions for the paper size loaded.

Lexmark C792 series Specifications

General

Print Technology	Color Laser
Print Speed (Letter, Black)	50 ppm
Print Speed (Letter, Color)	50 ppm
Processor Speed	1.2 GHz
Monthly Duty Cycle	150, 000 pages
Maximum Paper Size	8.5 x 14 inches (Legal)
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Connectivity	USB, Ethernet
Media Sizes Supported	A4, A5, Letter, Legal, Executive, Folio, JIS B5
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Input Capacity (Standard)	650 sheets
Output Capacity (Standard)	500 sheets