7-62 Service Manual
5062
88A0323 Plastite
M3.5 x 8 mm PAN
550-sheet top metal cover to 550-sheet drawer 10
550-sheet bottom cover to 550-sheet drawer 8
550-sheet option deflector to 550-sheet drawer 1
550-sheet drive assembly to 550-sheet drawer 6
ACM bias spring to lower frame 1
Auto-connect harness to frame 7
Bottom plate to frame 7
Contact bracket to HVPS board 3
Cable retainers to frame 4
Cartridge blower assembly to front frame 1
Exit cooling fan duct to frame 3
Front access door beacon cover to waste toner left cover 2
Front access door pivot to top cover 3
Interlock housing assembly 3
ITU block assembly to frame 3
Left cover to top cover and left frame 2
Left frame cable cover 1
Logo panel to top cover 3
Lower left cover to frame 2
LVPS exit duct to frame 2
LVPS to frame 2
Media rails, left and right, to front lower frame 2
MPF breakaway assembly, front 3
MPF breakaway assembly, rear 2
MPF cable cover to lower frame 2
MPF connector cover to duplex assembly 3
MPF drive assembly to frame 3
Operator panel assembly to top cover 2
Operator panel display bracket to OP cover 4
Printhead access cover to top cover 2
Rear cover to top cover and frame 3
Rear upper cover to rear cover 1
Redrive assembly 3
Right cover 6
Speaker to top cover 1
Top cover to left cover and front frame 3
Tray beacon cable plate assembly 4
UICC card to operator panel cover 4
waste toner left cover to frame 8
Screw identification table (continued)
P/N Screw type Location Qty
To Next Page
Loading...
