EasyManuals Logo

Lucent Technologies CBX 3500 User Manual

Lucent Technologies CBX 3500
888 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #147 background imageLoading...
Page #147 background image
Beta Draft Confidential
Configuring ATM Logical Ports on Frame-based Modules
About ATM Logical Ports
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/054-3
The following modules support direct trunk connections between a B-STDX 9000
switch and either a CBX 3500/CBX 500 or GX 550 switch:
• 1-port ATM CS DS3/E3
• 1-port ATM IWU OC-3c/STM-1
ATM OPTimum Cell Trunk
An OPTimum cell trunk is a virtual path that supports the transmission of VCC data.
Virtual circuits (VCs) may be established between any B-STDX 9000 and CBX
3500/CBX 500, or GX 550 user interface via B-STDX 9000 frame/cell trunks and
CBX 3500/CBX 500 or GX 550 cell trunks.
An OPTimum cell trunk establishes a single OSPF routing domain in a mixed network
that includes both B-STDX 9000 and CBX 3500/CBX 500 or GX 550 switches.
Routing decisions allow frame-based traffic to traverse either frame- or cell-based
trunks. Cell-based traffic is restricted to routes that traverse direct cell trunks.
OPTimum cell trunks have no Lucent trunk header. A unique VPI/VCI identifies the
circuit and controls traffic using a separate channel. A cell trunk uses a virtual path
through the ATM cloud as a trunk.
You can configure an ATM OPTimum cell trunk to create a switch-to-switch Lucent
trunk through a public data network (PDN) into another Lucent network. The Lucent
OPTimum trunk allows private enterprises to purchase low-cost, public-carrier
services as the trunk between two Lucent switches, rather than use a more expensive
leased-line service.
An OPTimum cell trunk enables you to create a trunk between either two
B-STDX 9000 switches or between a CBX 3500/CBX 500 or GX 550 and a
B-STDX 9000 switch. The following modules support OPTimum cell trunk
connections between B-STDX 9000 switches:
• 1-port ATM CS DS3/E3
• 1-port ATM IWU OC-3c/STM-1
• ATM UNI DS3/E3
The following modules support OPTimum cell trunk connections between a
B-STDX 9000 and either a CBX 3500/CBX 500 or GX 550 switch:
• 1-port ATM CS DS3/E3
• 1-port ATM IWU OC-3c/STM-1

Table of Contents

Other manuals for Lucent Technologies CBX 3500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lucent Technologies CBX 3500 and is the answer not in the manual?

Lucent Technologies CBX 3500 Specifications

General IconGeneral
BrandLucent Technologies
ModelCBX 3500
CategorySwitch
LanguageEnglish

Related product manuals