Beta Draft Confidential
Configuring Trunks
Adding an External Device Object to the Network
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/057-43
3. Select Psax to add a Psax object to the map. The Add Psax dialog box will display
(Figure 7-15).
Figure 7-15. Add Psax Dialog Box
4. Complete the fields as described in Table 7-8.
5. Choose Apply.
The system places an icon representing a PSAX object on the active network map.
Continue placing objects on the map, and choose OK to complete the operation
and close the Add Equipment dialog box.
6. Choose OK to close the Add Equipment Dialog box.
The network map displays an object icon representing the new external device.
7. For the newly added object to be saved, you must disable editing.
a. From the Edit menu select Disable Editing.
b. When asked to confirm, choose Yes to save the changes or No to disable
editing without saving any changes.
Table 7-8. Add Psax Dialog Box Fields
Field Description
Map Displays the map on which this object appears.
Submap Displays the submap on which this o
Label Enter a unique name for this PSAX switch.
Community Name Enter the SNMP community name which contains this
PSAX switch.
Ip Address Enter the IP address for the switch.
To Next Page
Loading...
Need help?
General
