Beta Draft Confidential
Configuring ATM Over MPLS Trunks
ATMoMPLS Trunk Licensing
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/058-3
You need to contact Lucent Technologies to:
• Order a new license for a new deployment.
• Update your license after a software upgrade.
License keys are issued based on the first six digits of the software revision
number. A new license key is required if you upgrade to a new software release.
Installing patch releases which increment the seventh and eights digits of the
revision number does not demand that you obtain a new license key.
• Upgrade your license to allow ATMoMPLS trunking features on a greater number
of switches in your network.
• Modify your license to change the Host ID of your NMS.
When you contact Lucent Technologies, you will need the following information:
To apply for a license key, please use the following URL:
http://www.lucent.com/products/license/atmompls.html
Managing License Keys With Navis EMS-CBGX
Navis EMS-CBGX enables you to manage ATMoMPLS license keys, and to
determine the number of allocated and available nodes based on your license. See
Chapter 3, “Managing License Keys with Navis EMS-CBGX” of the NavisXtend
Provisioning Server Command Line Interface User’s Reference for information on
using the command line interface (CLI) to manage license keys.
Number of management domains that will contain ATMoMPLS trunks.
For each management domain, the number of switches that
will use ATMoMPLS trunks.
Total number of primary and backup NMS systems in the management
domains that will contain ATMoMPLS trunks.
Host ID of each NMS that manages switches that will use
ATMoMPLS trunks.
To find out the 8-digit hexadecimal Host ID, enter hostid in
a Terminal window and press Return.
To Next Page
Loading...
Need help?
General
