Beta Draft Confidential
17-181/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring SVC Parameters
Configuring SVC Attributes
6. Select the LPort for the peer client node.
7. Choose OK. The Peer Client & Agent dialog box closes.
8. Choose OK in the Add Management VPCI Table Entry dialog box.
The Add Management VPCI Table Entry dialog box closes.
Modifying a Management VPCI Table Entry
The following steps describe the process for modifying a management VPCI table
entry:
1. Expand the SVC node under the LPort or under the switch.
The VPCI Tables node appears.
2. Expand the VPCI Tables node.
3. Right-click on the node for the VPCI table entry you want to modify, and select
Modify from the pop-up menu.
The Modify Management VPCI Table Entry dialog box appears.
4. Modify the fields as described in Table 17-5 on page 17-17.
5. If you want to modify the peer client, choose the Peer Client button.
The Peer Client dialog box appears.
6. Select the LPort for the peer client node.
7. Choose OK. The Peer Client dialog box closes.
8. Choose OK in the Modify Management VPCI Table Entry dialog box.
The Modify Management VPCI Table Entry dialog box closes.
Deleting a Management VPCI Table Entry
To delete a management VPCI table entry:
1. Expand the SVC node under the LPort or under the switch.
The VPCI Tables node appears.
2. Expand the VPCI Tables node.
3. Right-click on the node for the VPCI Table entry you want to delete, and select
Delete from the pop-up menu.
A prompt appears that asks if you are sure you want to delete the management
VPCI table entry.
4. Choose Yes.
To Next Page
Loading...
Need help?
General
