Beta Draft Confidential
Configuring SVC Parameters
Defining Network ID Parameters
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/0517-71
Modifying a Network ID
To modify an existing network ID:
1. Expand the SVC class node under the LPort or under the switch. The Network ID
class node appears.
2. Expand the Network ID class node.
3. Right-click on the instance node for the Network ID you want to modify, and
select Modify from the pop-up menu. The Modify Network ID dialog box
appears.
4. Modify the fields. For a description of the fields, see Table 17-17 on page 17-70.
5. When you have completed the fields, choose OK. The Modify Network ID dialog
box closes.
Deleting a Network ID
To delete an existing network ID:
1. Expand the SVC class node under the LPort or under the switch. The Network ID
class node appears.
2. Expand the Network ID class node.
3. Right-click on the instance node for the Network ID you want to delete, and select
Delete from the pop-up menu.
A prompt appears, asking if you are sure you want to delete the network ID.
4. Choose Yes.
To Next Page
Loading...
Need help?
General
