About This Guide
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/05xxxvii
Beta Draft Confidential
Reading Path
This section describes all of the documents that support the Navis EMS-CBGX NMS
and switch software.
Read the following documents to install and operate Navis EMS-CBGX Release
09.03.01.00 or greater and the associated switch software. Be sure to review the
accompanying SRNs for any changes not included in these guides.
These guides describe how to install and set up the switch
hardware, replace hardware modules, and interpret LED
indicators.
This guide describes prerequisite tasks, hardware and
software requirements, and instructions for installing and
upgrading Solaris and
Navis EMS-CBGX on the NMS.
Switch Hardware
Installation Guides
Installation and
Administration
Guide
This guide describes how to start the Navis EMS-CBGX client
on Windows and Solaris. It also provides a description of the
Navis EMS-CBGX window components, how to access
network and map configuration options, how to configure and
manage Lucent switches and instructions for customizing
Navis EMS-CBGX.
Navis EMS-CBGX
Getting Started
Guide
To Next Page
Loading...
Need help?
General
