Beta Draft Confidential
About ATM Logical Ports
Administrative Tasks
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/052-23
Administrative Tasks
This section describes how to:
• Use templates to define a new logical port
• Modify switch configuration attributes
• Delete ATM logical port components, including:
– Circuits
–Trunks
– Management VPI/VCI
– Logical Ports
Using Templates
If you defined a logical port configuration and saved it as a template (see Template
field on page 3-19), you can define a new logical port using the same parameters.
To define a logical port from a template:
1. Expand the instance node for the PPort, subport, channel, card (Multilink Frame
Relay [MLFR] type LPort), or IMA group to which you want to add an LPort.
The LPorts class node appears under the PPort or subport instance node.
2. Perform one of the following:
• Select Add LPort using Template from the Actions menu.
• Right-click on the LPorts class node and select Add LPort Using Template
from the pop-up menu.
The Choose Template dialog box appears (see Figure 2-3 on page 2-24).
To Next Page
Loading...
Need help?
General
