Beta Draft Confidential
Configuring SVC Parameters
Configuring SVC Port Prefixes
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/0517-41
Configuring SVC Port Prefixes
The SVC Port Prefix function enables you to define how calls are routed to the port.
Port prefixes are also used for calling party screening.
To define a port prefix:
1. In the navigation panel, expand the instance node for the LPort for which you
want to add an SVC port prefix. The SVC class node appears under the LPort
instance node.
2. Expand the SVC class node. The Port Prefix class node appears under the LPort
instance node.
3. Right-click on the Port Prefix class node and select Add from the pop-up menu.
The Add SVC Port Prefix dialog box appears (Figure 17-19).
Figure 17-19. Add SVC Port Prefix Dialog Box
4. Select an address format and scope. See page 17-32 for a description of these
address formats.
To Next Page
Loading...
Need help?
General
