Beta Draft Confidential
2-281/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
About ATM Logical Ports
Administrative Tasks
Deleting Trunks
To delete a trunk:
1. Expand the Trunks class node.
2. Select the desired trunk.
3. Perform one of the following:
• Select Delete from the Actions menu.
• Choose the Delete button from the toolbar.
• Right-click on the trunk instance node and select Delete from the pop-up
menu.
A dialog box asks if you are sure you want to delete the selected item.
4. Choose OK.
Deleting Management VPI/VCIs
To delete a Management VPI/VCI:
1. Expand the LPort instance node of the LPort for which you want to delete a
Management VPI/VCI.
The Mgmt VPI/VCI class node appears under the LPort instance node.
2. Expand the Mgmt VPI/VCI class node.
3. Right-click on the instance node for the Management VPI/VCI you want to delete,
and select Delete from the pop-up menu.
A message appears that asks if you are sure you want to delete the Management
VPI/VCI.
4. Choose Yes.
Deleting Logical Ports
To delete an LPort:
1. Right-click on the LPort instance node of the LPort you want to delete
2. Select Delete from the pop-up menu.
A message appears that asks if you are sure you want to delete the LPort.
3. Choose Yes.
Note – Make sure this logical port is not the logical port used as the feeder for an
ATM OPTimum trunk. If this is the case, either delete the OPTimum trunk logical port
or first define another feeder before you delete this logical port.
To Next Page
Loading...
Need help?
General
