Beta Draft Confidential
Configuring ATM Over MPLS Trunks
Configuring ATMoMPLS Trunk Logical Ports
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/058-37
ATMoMPLS Trunk Logical Port Administrative Attributes
The Administrative tab in the Add Logical Port dialog box is shown in Figure 8-20.
Figure 8-20. Add Logical Port: Administrative Tab
Bulk Statistics for All
PVCs on LPort
Select the check box to enable statistics collection for PVCs on
the logical port. To collect statistics on circuits, you must also
enable Bulk Statistics on each individual circuit.
Clear the check box (default) to disable statistics collection on
all PVCs on this logical port.
Note: Bulk Statistics is not supported on the 1-Port ATM IWU
OC-3c/STM-1 card.
Template Select the check box to save these settings as a template to
configure another logical port with similar options.
Clear the check box (default) if you do not wish to save the
settings as a template.
Table 8-10. Add Logical Port: General Tab Fields (Continued)
Field Action/Description
To Next Page
Loading...
