Beta Draft Confidential
Configuring PNNI Routing
Configuring PNNI Routing
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/0521-41
Configuring PNNI Routing
Use the following sequence to configure PNNI routing for your network:
Step 1. Enable Name LSA Flooding on the switch (page 21-42).
Step 2. Configure PNNI Node Parameters (page 21-43)
Step 3. Configure ATM NNI Logical Ports (page 21-50)
Step 4. Configure SVC port addresses for SVCs and SPVCs (page 17-55)
Step 5. Configure ATM PVCs (page 10-1); configure SVC/SPVC parameters
(page 17-1); configure SPVCs (page 18-1)
Step 6. Configure Management PVCs (page 11-4) or Management SPVCs
(page 11-11), and NMS Path(s) (page 11-15)
To Next Page
Loading...
Need help?
General
