Beta Draft Confidential
Port Security Screening
Administrative Tasks
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/0520-9
The Add Security Screen dialog box appears (Figure 20-2).
Figure 20-2. Add Security Screen Dialog Box
4. Complete the Add Security Screen dialog box fields, as described in Table 20-3.
Table 20-3. Add Security Screen Dialog Box
Field Description
Name Enter a name (up to 32 characters) for this security screen.
Call Direction The screen you configure is only applied to these SVCs. Choose
one of the following buttons:
• Ingress – (default) Screen incoming SVCs.
• Egress – Screen outgoing SVCs.
Type Select the Type of screen. This determines the action this screen
performs. Choose one of the following buttons:
• Block – (default) Blocks all SVCs that match the criteria.
• Pass – Passes all SVCs that match the criteria.
Calling Address Configure the Calling Address:
• Type – Select the address type from the pull-down list, either
E.164, AESA, or X.121. Select Ignore (default) if the screen
does not use this parameter.
• Address – Enter the address screen using the guidelines in
“About Security Screen Addresses” on page 20-4. Enter up to
15 characters for an E.164 address, up to 14 characters for an
X.121 address, or up to 40 characters for an AESA address.