Beta Draft Confidential
Configuring ATM Logical Ports on Frame-based Modules
Defining ATM OPTimum Frame Trunk Logical Ports
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/054-41
When you finish setting these attributes, continue with the section, “Completing
the Logical Port Configuration” on page 4-52.
Table 4-16. Configuring OPTimum Frame Trunk Attributes
For 1-port ATM CS DS3/E3 or 1-port
ATM IWU OC-3c/STM-1 cards see...
For frame-based cards see...
“Discard/Congestion Mapping
Attributes” on page 4-47
“Trap Control Attributes” on
page 4-31
“Priority Frame Attributes” on
page 4-34
To Next Page
Loading...
Need help?
General
