Beta Draft Confidential
4-28 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring ATM Logical Ports on Frame-based Modules
Defining ATM UNI DCE/DTE Logical Ports
Congestion Control Attributes
When configuring frame-based cards, select the Congestion Control tab in the Add
Logical Port dialog box (Figure 4-5) and complete the fields as described in
Table 4-11.
Figure 4-5. Add Logical Port: Congestion Control Tab
Note – Do not exceed the maximum threshold value for each card type. The absolute
congestion threshold cannot be greater than the maximum value allowed for each
logical port.
To Next Page
Loading...
Need help?
General
