Beta Draft Confidential
10-881/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring ATM PVCs
Configuring PMP Circuits
Deleting a PMP Circuit Root and Leafs
Before you delete a circuit root, you must delete all of the circuit’s leafs.
Deleting a PMP PVC Leaf
To delete a PMP PVC leaf:
1. Expand the Circuits class node.
2. Expand the PMP Roots class node.
3. Expand the desired PMP Root node.
4. Expand the PMP Leaves class node and select the desired PMP leaf.
5. Perform one of the following:
• Select Delete from the Actions menu.
• Choose the Delete button from the toolbar.
• Right-click on the PMP Leaf and select Delete from the pop-up menu.
A prompt asks if you are sure you want to delete the selected item.
6. Choose OK.
Deleting a PMP PVC Root
To delete a PMP PVC root:
1. Expand the Circuits class node.
2. Expand the PMP Roots class node and select the desired PMP root.
3. Perform one of the following:
• Select Delete from the Actions menu.
• Choose the Delete button from the toolbar.
• Right-click on the PMP root and select Delete from the pop-up menu.
A prompt asks if you are sure you want to delete the selected item.
4. Choose OK.
To Next Page
Loading...
Need help?
General
