Beta Draft Confidential
Configuring SPVCs
Restarting an Offnet Circuit
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/0518-29
Restarting an Offnet Circuit
An offnet circuit can be restarted from the Navis EMS-CBGX switch navigation
panel. Restarting an offnet circuit is useful when connecting with a new route and/or
path. The circuit must be in a managed state for the Restart option to be available.
Restart is not available for PMP offnet circuits.
To restart an offnet circuit:
1. Expand the Circuits node.
2. Expand the Offnet Circuits class node.
3. Right-click on the Offnet Circuit you wish to restart and select Restart from the
pop-up menu.
The Restart option will only be available if the circuit is in a managed state.
4. Choose Yes to continue with the Restart.
An Admin Down and Admin Up command is sent to the selected offnet circuit.
To Next Page
Loading...
Need help?
General
