Beta Draft Confidential
Configuring Trunks
Configuring APS Trunk Backup and Fast APS 1+1 for ATM Direct Trunks
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 1/19/057-35
Configuring the Primary Trunk for Fast APS 1+1
1. In the Networks object tree, expand the instance node for the network that
contains the switch.
2. Expand the Switches node.
3. Double-click on the switch to which you want to add the trunk. The Switch tab is
displayed.
4. Right-click on the Trunks node, and select Add from the popup menu as shown in
Figure 7-4 on page 7-18.
The Add Trunk dialog box (Figure 7-5 on page 7-19) appears.
5. In the Endpoints field, click on the Select button to choose two logical ports which
will be the trunk endpoints.
The Select Trunk Endpoints dialog box (Figure 7-6 on page 7-20) appears.
6. For each switch endpoint, select the name of the switch where the first working
port resides and the ATM direct trunk logical port that resides on the working port.
7. Choose OK to complete this configuration
To Next Page
Loading...
Need help?
General
