ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 xxxv
Beta Draft Confidential
About This Guide
The ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and
B-STDX 9000 provides detailed instructions for using Navis
®
EMS-CBGX to
configure Asynchronous Transfer Mode (ATM) services in a Lucent switch network.
Specifically, this guide describes how to configure logical ports, trunks, permanent
virtual circuits (PVCs), and switched virtual circuits (SVCs) to support ATM services
on the following Lucent Multiservice switches:
• CBX 3500
TM
• CBX 500
®
• GX 550
®
• B-STDX 9000
®
This guide also explains how to configure a variety of features that enhance the ATM
service platform, including Virtual Private Networks (VPNs), closed user groups
(CUGs), and port security screening.
This guide supports the following Network Management System (NMS) and switch
software releases:
• Navis EMS-CBGX,
Release 09.03.01.00 or greater
• CBX 3500 Multiservice Edge switch software Release 09.03.01.00 or greater
• Prior supported releases of CBX 500, GX 550, and B-STDX 9000
Multiservice
WAN switch software as noted in the Interoperability section of the
Navis EMS-CBGX Software Release Notice (SRN).
To Next Page
Loading...
Need help?
General
